Polishing Paste Coarse BB Ultra Heavy Cut

Professional polishing paste for heavy damage

ULTRA HEAVY CUT is a coarse-grained, professional polishing paste developed for fast removal of deep scratches, oxidation, and sanding marks up to P1200. Thanks to its sturdy abrasive grains, it provides maximum cutting power even on the most demanding paint finishes.

Maximum power, minimal dust

The silicone and filler-free formula makes the paste safe for use in paint shops and professional detailing studios. A specially developed composition reduces dust formation and improves polisher control, allowing for more precise and cleaner work. In combination with polishing pads from the Polishing series, optimal paint correction results are achieved.

Key features

• Very high degree of abrasiveness
• Removes sanding marks up to P1200
• Silicone and filler-free – safe for paint shops
• Low dust formation
• Suitable for all types of polishers and cutting pads
• Does not contain harmful solvents
• Enriched with a fragrance composition for more pleasant work

Recommendations for use

1. Shake the bottle well before use to ensure ingredients are evenly mixed.
2. Apply an appropriate amount of paste onto the polishing pad.
3. Start the polisher at a low speed and spread the paste over the surface.
4. Work on smaller areas, gradually increasing speed and adjusting pressure.
5. Control paint temperature to avoid overheating.
6. Work with moderate pressure until a characteristic film appears.
7. Remove paste residue with a soft microfiber cloth.
8. Check results using an inspection lamp and fluid; repeat the process if necessary.

Storage

• Store in a dry and cool place (15-25 °C)
• Keep away from direct sunlight and freezing