Ceramic Coating Set ONE + Hydro 50ml - durability 3 years

Warning: This ceramic coating requires advanced knowledge and experience in application. We recommend it for use exclusively by certified professionals. Application without proper training is done at your own risk. By purchasing this product, you confirm that you are aware of the application challenges and accept responsibility for possible irregularities or damage caused by improper application.

Ceramic Set 50 ml Content:

• Ultracoat Hydro HD 50 ml
• Ultracoat One 50 ml
• 2 soft microfiber block applicators
• 3 Ultracoat protected stickers
• 3 service cards

Ceramic coating ONE:

High-tech advanced ceramic coating. Designed for precise protection of almost all exterior surfaces. It binds to the surface with thousands of covalent bonds, ensuring perfect molecular integrity. This means that the coating extremely effectively protects the surface from UV damage, oxidation or strong chemicals and reduces the formation of micro-scratches.

The product is suitable for protecting paintwork, plastics, and even screens or rims. The application of this product is very simple – a trained detailer can coat entire vehicle panels in one go. By using this product, you will forget about problems with removing excess coating.

Durability: up to 3 years or 40,000 km

• Very simple application
• High efficiency – approx. 15 ml per car!
• Multipurpose – one product for paint and plastic!

Recommendations:

The coating should never be applied outdoors or in direct sunlight.
Ideal application conditions are temperatures ranging from 18-22°C and air humidity of 50-70%.
If the temperature and humidity are higher, the coating will react faster, so you must be prepared to remove excess coating more quickly.

• Always use new microfiber cloths. Ensure a sufficient number of cloths so you can change them frequently during application.
• Apply to small areas. We recommend dividing panels into sections of 50 cm x 50 cm for safer and easier application.
• Apply the coating under appropriate lighting.
• Apply a second layer immediately after the first to improve the coating's effectiveness.
• Allow the coating to dry for at least 24 hours for full curing. The first vehicle wash should not be done before 7 days after application.

Preparation:

The coating should never be applied outdoors or in direct sunlight.
Ideal application conditions are temperatures ranging from 18-22°C and air humidity of 50-70%.
If the temperature and humidity are higher, the coating will react faster, so you must be prepared to remove excess coating more quickly.

• Always use new microfiber cloths. Ensure a sufficient number of cloths so you can change them frequently during application.
• Apply to small areas. We recommend dividing panels into sections of 50 cm x 50 cm for safer and easier application.
• Apply the coating under appropriate lighting.
• Apply a second layer immediately after the first to improve the coating's effectiveness.
• Allow the coating to dry for at least 24 hours for full curing. The first vehicle wash should not be done before 7 days after application.

Application:

Prepare the coating, applicators, and several microfiber cloths.
Moisten the edge of the applicator with the product.
Apply the coating to the surface using the cross-patch method on sections measuring 50 cm x 50 cm.
Wait 1-2 minutes until a clear "flashing" appears, then wipe the surface with a soft microfiber cloth.
For better coating effectiveness, apply an additional layer repeating the same procedure.
Allow the coating 24 hours to fully cure and avoid washing the vehicle for at least 7 days after application.

Hydrophobic top coat Hydro HD

A protective coating based on SiO2 with durability of up to 12 months. It has extremely strong hydrophobic properties, and due to its simple and quick application, it is often used instead of waxes. It protects paintwork, plastics, and even car screens. It can be used as a standalone coating or as a top layer for Premium Bond 9H or One, giving them a very slippery feel and enhancing the hydrophobic effect. Thanks to the antistatic properties of Hydro HD, dust does not stick to the paintwork, but the product is not only practical — it also provides a beautiful shine that will make your car stand out!

The product color is not transparent, and the turbidity of Hydro HD is its natural characteristic.

• Maximum slickness
• High chemical resistance
• Extremely hydrophobic effect

Recommendation:

The coating should never be applied outdoors or in direct sunlight.
Ideal application conditions are temperatures ranging from 18-22°C and air humidity of 50-70%.

• Always use a new microfiber cloth. Ensure a sufficient number of cloths so you can change them frequently during application.
• Apply to small areas. We recommend dividing panels into sections of 40 cm x 40 cm for safe and easy application.
• If the temperature is higher than 25°C, apply to even smaller sections of 30 cm x 30 cm.
• Apply the coating under appropriate lighting.
• Apply a second layer immediately after the first to improve the coating's effectiveness.
• Allow the coating to dry for at least 30 minutes for full curing.

If Hydro HD is applied as a top coat, do not degrease the surface on the recently applied hard coating.

Application:

Prepare the coating, applicators, and several microfiber cloths.
Moisten the edge of the applicator with the product.
Apply the coating to the surface using the cross-patch method on sections measuring 40 cm x 40 cm.
Immediately wipe the surface with a soft microfiber cloth.
For better coating effectiveness, apply an additional layer repeating the same procedure.