Ceramic coating One 50ml - durability 3y

Warning: This ceramic coating requires advanced knowledge and application experience. We recommend that it be used exclusively by certified professionals. Application without proper training is at your own risk. By purchasing this product, you confirm that you are aware of the challenges in application and accept responsibility for any irregularities or damage caused by improper application.

Ceramic Coating ONE:

Includes 50ml ceramic coating and one applicator.

ONE requires Hydro HD as a top layer for slickness!

High-tech advanced ceramic coating. Designed for precise protection of almost all exterior surfaces. It bonds to the surface with thousands of covalent bonds, ensuring perfect molecular integrity. This means that the coating extremely effectively protects the surface from UV damage, oxidation, or strong chemicals and reduces the formation of micro-scratches.

The product is suitable for protecting paint, plastics, and even screens or rims. The application of this product is very simple – a trained detailer can coat entire vehicle panels in one go. By using this product, you will forget about problems with removing excess coating.

Durability: up to 3 years or 40,000 km

• Very simple application
• High efficiency – approx. 15 ml per car!
• Multi-purpose – one product for paint and plastic!

Recommendations:

Never apply the coating outdoors or in direct sunlight.
Ideal application conditions are temperatures ranging from 18-22°C and air humidity of 50-70%.
If the temperature and humidity are higher, the coating will react faster, so you must be prepared to remove excess coating more quickly.

• Always use new microfiber cloths. Ensure a sufficient number of cloths so you can change them frequently during application.
• Apply to small areas. We recommend dividing panels into sections of 50 cm x 50 cm for safer and easier application.
• Apply the coating under appropriate lighting.
• Apply a second coat immediately after the first to improve the coating's effectiveness.
• Allow the coating to cure for at least 24 hours for full hardening. The first vehicle wash should not be done before 7 days after application.

Preparation:

Never apply the coating outdoors or in direct sunlight.
Ideal application conditions are temperatures ranging from 18-22°C and air humidity of 50-70%.
If the temperature and humidity are higher, the coating will react faster, so you must be prepared to remove excess coating more quickly.

• Always use new microfiber cloths. Ensure a sufficient number of cloths so you can change them frequently during application.
• Apply to small areas. We recommend dividing panels into sections of 50 cm x 50 cm for safer and easier application.
• Apply the coating under appropriate lighting.
• Apply a second coat immediately after the first to improve the coating's effectiveness.
• Allow the coating to cure for at least 24 hours for full hardening. The first vehicle wash should not be done before 7 days after application.

Application:

Prepare the coating, applicators, and several microfiber cloths.
Moisten the edge of the applicator with the product.
Apply the coating to the surface using the cross-patch method (cross-patch method) in sections of 50 cm x 50 cm.
Wait 1-2 minutes until a clear "flashing" appears, then wipe the surface with a soft microfiber cloth.
For better coating effectiveness, apply an additional layer repeating the same procedure.
Allow the coating to fully cure for 24 hours and avoid washing the vehicle for at least 7 days after application.